View P5CD051X1_547738.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

P5CD016/021/041/051 and P5Cx081 family
Secure dual interface and contact PKI smart card controller
Rev. 3.2 -- 14 March 2011 150332 Product short data sheet PUBLIC
1. General description
1.1 CMOS14 SmartMX family features overview
The CMOS14 SmartMX family members are a modular set of devices featuring:
* * * * * * * * * *
16 KB, 20 KB, 40 KB, 52 KB and 80 KB EEPROM ROM memory size extended to 264 KB RAM memory size extended to 7.5 KB (CXRAM 5 KB, FXRAM 2.5 KB) High-performance secure Public Key Infrastructure (PKI) coprocessor (RSA, ECC) Secure dual/triple-DES coprocessor Secure AES coprocessor Memory Management Unit (MMU) ISO/IEC 7816 contact interface Optional ISO/IEC 14443 A Contactless Interface Unit (CIU) EEPROM with typically 500000 cycles endurance and a minimum of 25 years retention time
* Broad spectrum of delivery types * Optional certified crypto library modules for RSA, ECC, DES, AES, SHA and PRNG
The P5CD016/041/051 and P5Cx081 products provide improved SmartMX family performance with the following additional features:
* CPU kernel accelerated by factor 2, at the same time maintaining full instruction
compatibility
* FameXE coprocessor (clock up to 72 MHz) with reduced power consumption in all
three voltage classes
* Memory Management Unit (MMU) with 8 instead of 5 cache segments * Full binary ROM Code compatibility to P5Cx012/02x/040/073/080/144 family 1.2 CMOS14 SmartMX family properties
The long-established CMOS14 SmartMX family features a significantly enhanced secure smart card IC architecture. Extended instructions for Java and C code, linear addressing, high speed at low power and a universal memory management unit are among many other improvements added to the classic 80C51 core architecture. In the P5CD016/041/051 and P5Cx081 product family, NXP Semiconductors' proven
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
Secure_MX51 processor core has been further optimized over the existing version in 0.14 m CMOS technology. Therefore, these products now offer improved CPU speed, leading to shorter overall transaction times. At the same time, the FameXE cryptography coprocessor has been optimized for even lower power operation, while keeping its performance at the same industry-leading level. The availability of both contact interface and contactless or S2C interface enable the easy implementation of native or open platform and multi-application operating systems in market segments such as banking, E-passports, ID cards, Health cards, secure access, Java cards as well as Trusted Platform Modules (TPM).
1.3 Naming conventions
Table 1. x y Naming conventions Type of category: C = PKI controller + triple-DES coprocessor + AES coprocessor on selected products Interface options: C = contact interface - ISO/IEC 7816 D = dual interface - ISO/IEC 7816 + ISO/IEC 14443 contactless interface N = ISO/IEC 7816 + S2C interface for NFC zzz Amount of non-volatile memory in KB, increasing count for further product options P5xyzzz SmartMX platform
1.4 Cryptographic hardware coprocessors
1.4.1 FameXE coprocessor
The approved and modular FameXE architecture supports the trend of increasing RSA keys with faster execution speeds as well as Elliptic Curve Cryptography (ECC) based on GF(p) or GF(2n) at best performance. FameXE supports RSA with an operand length of up to 8-kbit (up to 4-kbit with intermediate storage in RAM only). The now further reduced power-consumption FameXE PKI coprocessor supports 192-bit ECC key length that offers the same level of security as 2048-bit RSA. An ECC GF(2n) based signature, using a 163-bit key can be executed in less than 30 ms providing a security level comparable to 1024-bit RSA. The operand size for ECC, supported by FameXE, is only limited by the 2.5 KB size of the FXRAM. FameXE operates at up to 72 MHz, is easy to use and the flexible interface provides programmers with the freedom to implement their own cryptography solutions. A secure and CC EAL5+ certified crypto library providing a large range of required functions will be available for all devices in order to support customers in implementing public key-based solutions.
1.4.2 Triple-DES coprocessor
The DES widely used for symmetric encryption is supported by a dedicated, high performance, highly attack-resistant hardware coprocessor. Single DES and triple-DES, based on two or three DES keys, can be executed within less than 40 s. Relevant standards (ISO/IEC, ANSI, FIPS) and Message Authentication Code (MAC) are fully supported. A secure crypto library element for DES is available.
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
2 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
1.4.3 AES coprocessor
SmartMX is the first smart card microcontroller platform to provide a dedicated high performance 128-bit parallel processing coprocessor to support secure AES. The implementation is based on FIPS197 as standardized by the National Institute for Standards and Technology (NIST), and supports key lengths of 128-bit, 192-bit, and 256-bit with performance levels comparable to DES. AES is the next generation for symmetric data encryption and recommended successor to DES providing significantly improved security level. A secure crypto library element for AES is available.
1.5 SmartMX interfaces
1.5.1 SmartMX contact interface
Operating in accordance with ISO/IEC 7816, the SmartMX contact interface is supported by a built-in Universal Asynchronous Receiver/Transmitter (UART), which enables data rates of up to 1 Mbit/s allowing for the automatic generation of all typical baud rates and supports transmission protocols T=0 and T=1. Up to two additional I/Os are available.
1.5.2 SmartMX contactless interface
The optional contactless interface is fully compatible with ISO/IEC 14443 A as well as NXP Semiconductors' field proven MIFARE technology. A dedicated Contactless Interface Unit (CIU) manages and supports communication using data rates up to 848 kbit/s. A true anti-collision method (in accordance with ISO/IEC 14443-3) enables multiple cards to be handled simultaneously. The optional MIFARE functionality provided in configurations B1 (MIFARE 1K implementation), B4 (MIFARE 4K implementation), D1 (MIFARE 1K implementation with MIFARE simultaneous operation enabled) and D4 (MIFARE 4K implementation with MIFARE simultaneous operation enabled) safeguard the interface compatibility with any installed MIFARE infrastructure. The ability to run the MIFARE protocol concurrently with other contactless transmission protocols implemented by the customer code (T=CL or self defined) enables the combination of new services and existing applications based on MIFARE (e.g. ticketing) on a single dual interface controller based smart card. The MIFARE implementation on the SmartMX makes use of the approved true random number generator and thus is not susceptible to attacks based on the predictability of random numbers. This emulation is separated from the rest of the SmartMX by a firewall that is part of the Common Criteria evaluation. A tutorial software library for ISO/IEC 14443-3 and ISO/IEC 14443-4 is available to support NXP Semiconductors' customers for easy integration of the contactless technology into current system solutions. The input capacitance can be factory configured for either standard loop antennas or for smaller antennas (such as "ID1/2" antennas). This is accomplished by setting the device input capacitance to either the standard value or to a higher value.
1.5.3 SmartMX S2C interface
The S2C interface is intended for use with NXP Semiconductors NFC circuits (e.g. PN544) in order to configure secure NFC systems, for example in mobile hand sets.
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
3 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
Operated both in Contact mode (ISO/IEC 7816) and in S2C mode, the user defines the final function of the controller chip with its operating system. This allows the same level of security, functionality and flexibility for the contact interface and the S2C interface. The S2C interface is connected to the internal ISO/IEC 14443 CIU. The CIU handles the demodulation and the modulation of the S2C signals which enables a full contactless communication via this interface, and the NFC front-end can be enabled. As the S2C interface is connected to the CIU, the power to the P5CN081 must be supplied via the VDD and VSS pads in order to use the S2C interface. The S2C interface does not need any software adaptation compared to normal contactless operation. When connected to the S2C interface of a NFC front-end, the device is compatible with existing MIFARE reader infrastructure, and the optional emulation modes of MIFARE 1 K or MIFARE 4 K enable fast system integration and backward compatibility to MIFARE based cards. The communication on the S2C interface supports both the ISO/IEC 14443 A part 3 and the ISO/IEC 14443 part 4.
1.6 Security features
SmartMX incorporates a wide range of both inherent and OS-controlled security features as a countermeasure against all types of attack. NXP Semiconductors apply their extensive knowledge of chip security, combined with handshaking circuit technology, very dense 5-metal layer 0.14 m technology, glue logic and active shielding methodology for optimum results in CC EAL5+, EMVCo and other third-party certifications and approvals. SmartMX Memory Management Unit (MMU), designed to define various memory segments and assign security attributes accordingly, supports a strong firewall concept that keeps different applications separate from each other. Only the System mode has full access privileges to all memory space and on-chip peripherals, while the User mode only has privileges defined upon card personalization and executed under the control of the System mode. Secure Fetch technology significantly enhances the chip hardware security against certain classes of light attack using light directed at chip hardware. More specifically, Secure Fetch offers increased protection against attacks using higher spatial resolution and those using shorter and longer light pulses with both single and multiple pulses. It protects both the device memory and ROM, RAM and EEPROM code fetching operations, greatly increasing the probability of detecting fault injection attacks. This unique security technology offers increased protection against future attack scenarios that use light and laser sources, facilitating the development of highly secure software applications for customers. The SmartMX security features are acknowledged as having outstanding properties by most NXP Semiconductors' customers. The countermeasures against light attacks are regarded as "best-in-class".
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
4 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
1.7 Security evaluation and certificates
Hardware security certification in accordance with CC EAL5+ is attained. Also, third-party approval such as EMVCo (VISA, CAST), ZKA and others, depending on the application requirements, are available. NXP Semiconductors continues to drive forward third-party security evaluations to provide its customers with the relevant information and documentation needed to execute subsequent composite evaluations of implemented applications.
1.8 Security licensing
In addition to the various intellectual properties regarding attack resistance of the NXP Semiconductors' owned SmartMX family, NXP Semiconductors has obtained a patent license for SPA and DPA countermeasures from Cryptography Research Incorporated. (CRI). This license covers both hardware and software countermeasures. It is important to customers that countermeasures within the operating system are covered under this license agreement with CRI. Further details are available on request.
1.9 Optional crypto library
NXP Semiconductors offer an optional crypto library for all family types:
* Various algorithms
- AES encryption and decryption using the AES coprocessor - DES and triple-DES encryption and decryption using the DES coprocessor - RSA encryption and decryption, signature generation and verification for straightforward and CRT keys up to 5024 bits - RSA key generation - ECC over GF(p) signature generation and verification (ECDSA) and Diffie-Hellman key exchange for keys up to 544 bits - ECC over GF(p) key generation - ECC over GF(2n) signature generation and verification (ECDSA) and Diffie-Hellman key exchange for keys up to 571 bits - ECC over GF(2n) key generation - SHA-1, SHA-224 and SHA-256 hash algorithm - Pseudo-Random Number Generator (PRNG)
* Easy to use API for all algorithms * Secure operation in contact as well as in the contactless mode * Latest built-in security features to avoid power (SPA/DPA), timing and fault attacks
(DFA)
* Common criteria CC EAL5+ certification available [except ECC over GF(2n)] in
accordance with BSI-PP-0002 protection profile
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
5 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
2. Features and benefits
2.1 Standard family features
EEPROM: choice of 16 KB, 20 KB, 40 KB, 52 KB or 80 KB Data retention time: 25 years minimum Endurance: 500000 cycles typical ROM: 264 KB RAM: 7680 B 256 B IRAM + 4.75 KB standard RAM usable for CPU 2560 B FXRAM usable for FameXE Dedicated, Accelerated Secure_MX51 smart card CPU (Memory eXtended/enhanced 80C51) 5-metal layer 0.14 m CMOS technology Operating in Contact and Contactless mode (dependent on family type option) Featuring a 24-bit universal memory space, 24-bit program counter Combined universal program and data linear address range up to 16 MB Additional instructions to improve: - pointer operations - performance - code density of both C and Java source code ISO/IEC 7816 contact interface ISO/IEC 14443 contactless interface PKI coprocessor FameXE Support of major Public Key Cryptography (PKC) systems such as RSA, Elgamel, DSS, Diffie-Hellman, Guillou-Quisquater, Fiat-Shamir and Elliptic Curves 8192 bits maximum key length for RSA with randomly chosen modulus 4096 bits maximum key length for calculation within RAM 32-bit interface Boolean operations for acceleration of standard, symmetric cipher algorithms High speed triple-DES coprocessor (64-bit parallel processing DES engine) Two or three keys loadable DES3 performance < 40 s High speed AES coprocessor (128-bit parallel processing AES engine) Memory Management Unit (MMU) with increased number of 8 cache segments Low power and low voltage design using NXP Semiconductors' handshaking technology Multiple source vectorized interrupt system with four priority levels Watch exception provides software debugging facility Multiple source RESET system Two 16-bit timers Highly reliable EEPROM for both data storage and program execution Bytewise EEPROM programming and read access Versatile EEPROM programming of 1 B to 64 B at a time or, optionally 1 B to 128 B at a time
P5CD016_021_041_51_Cx081_FAM_SDS All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
6 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
Typical EEPROM page erasing time: 1.7 ms Typical EEPROM page programming time: 1.0 ms Power-saving Idle mode Wake-up from Idle mode by RESET or any activated interrupt Contact configuration and serial interface in accordance with ISO/IEC 7816 Power-saving Sleep (power-down) mode or Clockstop mode ISO/IEC 7816 UART supporting standard protocols T=0 and T=1 as well as high speed personalization up to 1 Mbit/s External or internally generated configurable CPU clock 1 MHz to 10 MHz operating external clock frequency range Internal CPU clock up to 62 MHz with synchronous operation Internal clocking independent of externally applied frequency High speed 16-bit CRC engine in accordance with ITU-T polynomial definition Low power Random Number Generator (RNG) in hardware, AIS-31 compliant 1.62 V to 5.5 V extended operating voltage range for class C, B and A Optional extended Class B operation mode (2.2 V to 5.5 V targeted for battery supplied applications) -25 C to +85 C ambient temperature Broad spectrum of delivery types: Wafers Modules Packages Inlays
2.2 Product specific family features
P5CC081 ISO/IEC 7816 contact interface Two additional I/O ports: IO2 and IO3 for full-duplex serial data communication P5CD016, P5CD021, P5CD041, P5CD051 and P5CD081 CIU fully compatible with ISO/IEC 14443A: - 13.56 MHz operating frequency - fully supports the T=CL protocol in accordance with ISO/IEC 14443-4 - factory configurable for higher input capacitance to match smaller loop antennas - supported data transfer rates: 106 kbit/s, 212 kbit/s, 424 kbit/s and 848 kbit/s - MIFARE reader infrastructure compatibility via optional MIFARE 1 K or 4 K implementation including built-in anticollision support Two additional I/O ports: IO2 and IO3 for full-duplex serial data communication P5CN081 S2C interface One additional I/O port: IO2 for optional proprietary use
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
7 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
2.3 Security features
Enhanced security sensors: Low and high clock frequency sensor Low and high temperature sensor Low and high supply voltage sensor Single Fault Injection (SFI) attack detection Light sensors (included integrated memory light sensor functionality) Secure Fetch technology, protecting ROM, RAM and EEPROM code fetch operations Electronic fuses for safeguarded mode control Active shielding Unique ID for each die Clock input filter for protection against spikes Power-up and power-down reset Optional programmable card disable feature Memory security (encryption and physical measures) for RAM, EEPROM and ROM Memory Management Unit (MMU) including memory protection: Secure multi-application operating systems via two different operating modes: System mode and User mode OS-controlled access restriction mechanism to peripherals in User mode Memory mapping up to 8 MB code memory Memory mapping up to 8 MB data memory Optional disabling of ROM read instructions by code executed in EEPROM Optional disabling of any code execution out of RAM EEPROM programming: No external clock Hardware sequencer controlled On-chip high voltage generation Enhanced error correction mechanism 64 B or 128 B EEPROM for customer-defined security FabKey, featuring batch-, wafer- or die-individual security data, included encrypted diversification features on request 14 B user write-protected security area in EEPROM (byte access, inhibit functionality per byte) 32 B write-once security area in EEPROM (bit access) 32 B user read-only area in EEPROM (byte access) Customer-specific EEPROM initialization available
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
8 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
2.4 Design-in support
Approved development tool chain: Keil PK51 development tool package including Vision3/dScope C51 simulator, additional specific hardware drivers including simulation of contactless interface and ISO/IEC 7816 card interface board. A SmartMX DBox allows software debugging and integration tests. Ashling Ultra-Emulator platform, stand-alone ROM prototyping boards and ISO/IEC 7816 and ISO/IEC 14443 card interface board. Code coverage and performance measurement software tools for real-time software testing. Dual interface dummy modules OM6711 (PDM 1.1 - SOT658) with special antenna bonding on C4 and C8 for testing the implanting process and antenna connection. Software libraries: Libraries supporting contactless communication in accordance with ISO/IEC 14443, part 3 and 4 T=1 communication in accordance with ISO/IEC 7816, part 3 EEPROM read/write routines
3. Applications
3.1 Application areas
Banking Java cards E-passports ID cards Secure access Trusted platform modules
4. Quick reference data
Table 2. Symbol VDD Quick reference data Parameter supply voltage Conditions class A: 5 V range class B: 3 V range class BE: 3 V range Class C: 1.8 V range EEPROM tret Nendu(W) retention time write endurance Tamb = +55 C under all operating conditions 25 5x 105 years cycles
[1] [1] [1] [1]
Min 4.5 2.7 2.2 1.62
Typ 5.0 3.0 3.0 1.8
Max 5.5 3.3 3.3 1.98
Unit V V V V
[1]
All described supply voltages are in accordance with ISO/IEC 7816-3.
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
9 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
5. Ordering information
Table 3. Ordering information Package Name P5CC081UA P5CD016UA P5CD021UA P5CD041UA P5CD051UA P5CD081UA P5CN081UA P5CD016UE P5CD021UE P5CD041UE P5CD051UE P5CD081UE P5CD016HN P5CD021HN P5CC081HN P5CN081HN P5CD016A4 P5CD041A4 P5CD051A4 P5CD081A4 P5CD016A6 P5CD041A6 P5CD051A6 P5CD081A6 P5CC081XS P5CC081XD P5CD016X1 P5CD021X1 P5CD041X1 P5CD051X1 P5CD081X1 P5CD016X0 P5CD021X0 P5CD041X0 P5CD051X0 P5CD081X0 PDM1.1 dual interface chip card module (super 35 mm tape format, 8-contact) SOT658-3 PCM1.1 Pd-PCM1.1 PDM1.1 contact chip card module (super 35 mm tape format, 8-contact) palladium plated contact chip card module (super 35 mm tape format, 8-contact) dual interface chip card module (plug-in type; super 35 mm tape format, 8-contact) SOT658-1 SOT658-1 SOT658-3 MOB6 contactless chip card module (super 35 mm tape format, module SOT500-3 thickness 250 m) MOB4 contactless chip card module (super 35 mm tape format, module SOT500-2 thickness 320 m) HVQFN32 plastic thermal enhanced very thin quad flat package; no leads; 32 terminals; body 5 x 5 x 0.85 mm SOT617-1 FFC 8 inch wafer (sawn; 75 m thickness; on film frame carrier; electronic fail die marking according to SECSII format) not applicable FFC Description 8 inch wafer (sawn; 150 m thickness; on film frame carrier; electronic fail die marking according to SECSII format) Version not applicable Type number
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
10 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
Table 3.
Ordering information ...continued Package Name Description dual interface chip card module in super 35 mm tape format (8-contact, dual source) palladium plated dual interface module (super 35 mm format, 8-contact) Version SOT658-3 SOT658-3 PDM1.1 Pd-PDM1.1
Type number P5CD051XS P5CD016XD P5CD021XD P5CD041XD P5CD051XD P5CD081XD P5CD016XE P5CD021XE P5CD041XE P5CD051XE P5CD081XE P5CD041Ai P5CD081Ai Table 4. Product type P5CD016 P5CD021 P5CD041 P5CD051 P5CC081 P5CD081 P5CN081
Pd-PDM1.1
palladium plated dual interface chip card module (plug-in type; super 35 mm tape format, 8-contact)
SOT658-3
Inlay
chip module embedded in custom inlay; inquire at NXP not applicable Semiconductors sales for details; i = inlay type, can be any letter
Feature table EEPROM [KB] 16 20 40 52 80 80 80 User ROM [KB] 264 264 264 264 264 264 264 Total RAM [KB] 7.5 7.5 7.5 7.5 7.5 7.5 7.5 CXRAM FXRAM Coprocessor [KB] [KB] FameXE DES AES 5 5 5 5 5 5 5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes ISO/IEC 7816 Interface option IO pads 3 3 3 3 3 3 3 dual interface dual interface dual interface dual interface contact dual interface contact + S2C interface for NFC
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
11 of 20
xxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x xxxxxxxxxxxxxx xxxxxxxxxx xxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxx x x
Product short data sheet PUBLIC Rev. 3.2 -- 14 March 2011 150332 12 of 20
P5CD016_021_041_51_Cx081_FAM_SDS
6. Functional diagram
NXP Semiconductors
P5CC081
ROM EEPROM 80 KB DATA AND PROGRAM MEMORY RAM
IO1 IO2 IO3
All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2011. All rights reserved.
264 KB PROGRAM MEMORY PROGRAMMABLE IO1, IO2, IO3 UART ISO 7816
7680 B DATA MEMORY
FameXE ENHANCED PUBLIC KEY COPROCESSOR e.g. RSA, ECC
P5CD016/021/041/051 and P5Cx081
MEMORY MANAGEMENT UNIT (MMU)
Secure dual interface and contact PKI smart card controller
CLK
CLOCK FILTER
CLOCK GENERATION
SECURE_MX51 CPU
RST_N
SECURITY SENSORS RESET GENERATION
TIMERS
TRIPLE-DES COPROCESSOR CRC16 FAST RNG
AES COPROCESSOR
16-bit 16-bit T0 T1 VOLTAGE REGULATOR
VDD
VSS
001aal385
Fig 1.
Functional diagram P5CC081
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
Product short data sheet PUBLIC Rev. 3.2 -- 14 March 2011 150332 13 of 20
P5CD016_021_041_51_Cx081_FAM_SDS All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2011. All rights reserved.
NXP Semiconductors
P5CD016 P5CD021
LA
P5CD041 P5CD081
P5CD051
RF INTERFACE LB
CIU ISO 14443
ROM
EEPROM 16 KB/20 KB/ 52 KB/ 40 KB/ 80 KB DATA AND PROGRAM MEMORY
RAM
IO1 IO2 IO3 PROGRAMMABLE IO1, IO2, IO3 UART ISO 7816
264 KB PROGRAM MEMORY
7680 B DATA MEMORY
FameXE ENHANCED PUBLIC KEY COPROCESSOR e.g. RSA, ECC
P5CD016/021/041/051 and P5Cx081
MEMORY MANAGEMENT UNIT (MMU)
Secure dual interface and contact PKI smart card controller
CLK
CLOCK FILTER
CLOCK GENERATION
SECURE_MX51 CPU
RST_N
SECURITY SENSORS RESET GENERATION
TIMERS
TRIPLE-DES COPROCESSOR CRC16 FAST RNG
AES COPROCESSOR
16-bit 16-bit T0 T1 VOLTAGE REGULATOR
VDD
VSS
001aal386
Fig 2.
Functional diagram P5CD016/P5CD021/P5CD041/P5CD081
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
Product short data sheet PUBLIC Rev. 3.2 -- 14 March 2011 150332 14 of 20
P5CD016_021_041_51_Cx081_FAM_SDS All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2011. All rights reserved.
NXP Semiconductors
P5CN081
SIGIN S2C INTERFACE SIGOUT 264 KB PROGRAM MEMORY PROGRAMMABLE IO1, IO2 IO2 UART ISO 7816 CIU ISO 14443 ROM EEPROM 80 KB DATA AND PROGRAM MEMORY RAM
IO1
7680 B DATA MEMORY
FameXE ENHANCED PUBLIC KEY COPROCESSOR e.g. RSA, ECC
P5CD016/021/041/051 and P5Cx081
MEMORY MANAGEMENT UNIT (MMU)
Secure dual interface and contact PKI smart card controller
CLK
CLOCK FILTER
CLOCK GENERATION
SECURE_MX51 CPU
RST_N
SECURITY SENSORS RESET GENERATION
TIMERS
TRIPLE-DES COPROCESSOR CRC16 FAST RNG
AES COPROCESSOR
16-bit 16-bit T0 T1 VOLTAGE REGULATOR
VDD
VSS
001aal387
Fig 3.
Functional diagram P5CN081
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
7. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS (ground = 0 V). Symbol Parameter VDD VI II IO Ilu VESD supply voltage input voltage input current output current latch-up current electrostatic discharge voltage any signal pad pad IO1, IO2 or IO3 pad IO1, IO2 or IO3 VI < 0 V or VI > VDD pads VDD, VSS, CLK, RST_N, IO1, IO2, IO3 pads LA, LB Ptot Tstg
[1] [2] [3]
[1]
Conditions
Min -0.5 -0.5 -
Max +6.0 VDD + 0.5 15.0 15.0 100 4.0
Unit V V mA mA mA kV
[1] [2] [3]
-
2.0 1 -
kV W C
total power dissipation storage temperature
MIL Standard 883-D method 3015; human body model; C = 100 pF, R = 1.5 k; Tamb = -25 C to +85 C. Depending on appropriate thermal resistance of the package. Depending on delivery type, refer to NXP Semiconductors General Specification for 8" Wafers and to NXP Semiconductors Contact & Dual Interface Chip Card Module Specification.
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
15 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
8. Abbreviations
Table 6. Acronym AES API CIU CRC CRT DES DFA DPA DSS ECC ECDSA EEPROM GF I/O MAC MMU OS PKC PKI PRNG RNG RSA S2C SFI SHA SMD SPA TPM UART Abbreviations Description Advanced Encryption Standard Application Programming Interface Contactless Interface Unit Cyclic Redundancy Check Chinese Remainder Theorem Digital Encryption Standard Differential Fault Analysis Differential Power Analysis Digital Signature Standard Elliptic Curve Cryptography Elliptic Curve Digital Signature Algorithm Electrically Erasable Programmable Read-Only Memory Galois Function Input/Output Message Authentication Code Memory Management Unit Operating System Public Key Cryptography Public Key Infrastructure Pseudo-Random Number Generator Random Number Generator Rivest, Shamir and Adleman SigIn-SigOut-Connection Single Fault Injection Secure Hash Algorithm Surface Mounted Device Simple Power Analysis Trusted Platform Module Universal Asynchronous Receiver/Transmitter
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
16 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
9. Revision history
Table 7. Revision history Release date Data sheet status 20110314 Product short data sheet Change notice Supersedes P5CD016_021_041_Cx081 _FAM_SDS_31 Document ID P5CD016_021_041_51_Cx081_FAM_ SDS v.3.2 Modifications:
* * * * * * *
The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. Legal texts have been adapted to the new company name where appropriate. Document version number revised Added Product type P5CD051 Added in EEPROM: 52 KB Product short data sheet P5CD016_021_041_Cx081 _FAM_SDS_1
P5CD016_021_041_Cx081_FAM_SDS 20100308 _31 Modifications:
Document version number revised Changed all instances of kB to KB Product short data sheet -
P5CD016_021_041_Cx081_FAM_SDS 20100302 _1
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
17 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
10. Legal information
10.1 Data sheet status
Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet
[1] [2] [3]
Product status[3] Development Qualification Production
Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
10.2 Definitions
Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet.
malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.
(c) NXP B.V. 2011. All rights reserved.
10.3 Disclaimers
Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
18 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products -- Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications.
10.4 Licenses
ICs with DPA Countermeasures functionality NXP ICs containing functionality implementing countermeasures to Differential Power Analysis and Simple Power Analysis are produced and sold under applicable license from Cryptography Research, Inc.
10.5 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. FabKey -- is a trademark of NXP B.V. MIFARE -- is a trademark of NXP B.V.
11. Contact information
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com
P5CD016_021_041_51_Cx081_FAM_SDS
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2011. All rights reserved.
Product short data sheet PUBLIC
Rev. 3.2 -- 14 March 2011 150332
19 of 20
NXP Semiconductors
P5CD016/021/041/051 and P5Cx081
Secure dual interface and contact PKI smart card controller
12. Tables
Table 1. Table 2. Table 3. Table 4. Naming conventions . . . . . . . . . . . . . . . . . . . . .2 Quick reference data . . . . . . . . . . . . . . . . . . . . .9 Ordering information . . . . . . . . . . . . . . . . . . . .10 Feature table . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Table 5. Table 6. Table 7. Limiting values . . . . . . . . . . . . . . . . . . . . . . . . 15 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 17
13. Figures
Fig 1. Fig 2. Functional diagram P5CC081 . . . . . . . . . . . . . . .12 Functional diagram Fig 3. P5CD016/P5CD021/P5CD041/P5CD081. . . . . . 13 Functional diagram P5CN081 . . . . . . . . . . . . . . . 14
14. Contents
1 1.1 1.2 1.3 1.4 1.4.1 1.4.2 1.4.3 1.5 1.5.1 1.5.2 1.5.3 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 3 3.1 4 5 6 7 8 9 10 10.1 10.2 General description . . . . . . . . . . . . . . . . . . . . . . 1 CMOS14 SmartMX family features overview . . 1 CMOS14 SmartMX family properties . . . . . . . . 1 Naming conventions . . . . . . . . . . . . . . . . . . . . . 2 Cryptographic hardware coprocessors . . . . . . . 2 FameXE coprocessor . . . . . . . . . . . . . . . . . . . . 2 Triple-DES coprocessor . . . . . . . . . . . . . . . . . . 2 AES coprocessor . . . . . . . . . . . . . . . . . . . . . . . 3 SmartMX interfaces . . . . . . . . . . . . . . . . . . . . . 3 SmartMX contact interface . . . . . . . . . . . . . . . . 3 SmartMX contactless interface . . . . . . . . . . . . . 3 SmartMX S2C interface . . . . . . . . . . . . . . . . . . 3 Security features. . . . . . . . . . . . . . . . . . . . . . . . 4 Security evaluation and certificates . . . . . . . . . 5 Security licensing . . . . . . . . . . . . . . . . . . . . . . . 5 Optional crypto library. . . . . . . . . . . . . . . . . . . . 5 Features and benefits . . . . . . . . . . . . . . . . . . . . 6 Standard family features . . . . . . . . . . . . . . . . . . 6 Product specific family features . . . . . . . . . . . . 7 Security features. . . . . . . . . . . . . . . . . . . . . . . . 8 Design-in support . . . . . . . . . . . . . . . . . . . . . . . 9 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Application areas . . . . . . . . . . . . . . . . . . . . . . . 9 Quick reference data . . . . . . . . . . . . . . . . . . . . . 9 Ordering information . . . . . . . . . . . . . . . . . . . . 10 Functional diagram . . . . . . . . . . . . . . . . . . . . . 12 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . 15 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 17 Legal information. . . . . . . . . . . . . . . . . . . . . . . 18 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 18 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 10.3 10.4 10.5 11 12 13 14 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 19 19 19 20 20 20
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'.
(c) NXP B.V. 2011.
All rights reserved.
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 14 March 2011 150332 Document identifier: P5CD016_021_041_51_Cx081_FAM_SDS

▲Up To Search▲

Price & Availability of P5CD051X1

	To Download P5CD051X1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .